website metrics how to wire 6p2c to 4p4c
Wire it - Do it Yourself Home Wiring Forum
Welcome, Guest. Please login or register.
August 23, 2019, 11:06:03 PM

Login with username, password and session length
Search:     Advanced search
833 Posts in 290 Topics by 405 Members
Latest Member: Jscoyne2
* Home | Help | Search | Login | Register
+  Wire it - Do it Yourself Home Wiring Forum
|-+  Telephone
| |-+  Telephone Wiring
| | |-+  how to wire 6p2c to 4p4c
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] | Go Down Print
Author Topic: how to wire 6p2c to 4p4c  (Read 5536 times)
Posts: 1

« on: August 06, 2012, 05:47:36 PM »

I bought an adapter that will let me use a bluetooth headset with a landline telephone. Problem is, the connector my Cisco IP Phone 7960 series is expecting is a 4P4C, but the connectors on the bluetooth adapter are 6P2C.

Is it possible to wire these togethor? How would I do it, are there any diagrams online? I'm just a tinkerer with connecting wires, but if its possible I should be able to figure it out with some guidance.
Master Member
Posts: 387

« Reply #1 on: August 06, 2012, 09:05:54 PM »

First I would make sure the headset in compatible with the phone, as for the RJ connectors, as long as you make them with straight through wiring the same colors on the same pins on each end it is just a pass through and as long as you have enough conductors to complete the job you’re in business.
Pages: [1] | Go Up Print 
« previous next »
Jump to:  

Fluke Corporation 322 AC Clamp Meter Greenlee TK-30 Basic Electrical Kit Klein CL200 600 Amp AC Clamp Meter with Temperature Sensor
Powered by MySQL Powered by PHP Powered by SMF 2.0.2 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.298 seconds with 50 queries.