website metrics New Ground fault tripping
Wire it Yourself.com - Do it Yourself Home Wiring Forum
Welcome, Guest. Please login or register.
December 22, 2024, 06:44:53 AM

Login with username, password and session length
Search:     Advanced search
833 Posts in 290 Topics by 405 Members
Latest Member: Jscoyne2
* Home | Help | Search | Login | Register
+  Wire it Yourself.com - Do it Yourself Home Wiring Forum
|-+  Electrical
| |-+  Electrical Wiring
| | |-+  New Ground fault tripping		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] | Go Down Print
Author Topic: New Ground fault tripping  (Read 4127 times)
fharris770
Newbie
*
Posts: 5
« on: March 09, 2016, 04:05:54 PM »
I just installed a GFCI 15 amp breaker and ran the feed to a junction box then ran two wires to two outside outlets I installed.  All new wiring, receptacles, and breaker.  turned on breaker and had power to both outside outlets.  Pushed the test button on breaker and it tripped as it should.

When I plug a drill into either receptacle it trips.  Not the first GFCI I have installed.  Any ideas as to what I might have done wrong?
« Last Edit: March 09, 2016, 04:09:29 PM by fharris770 » Logged
JP
Administrator
Master Member
*****
Posts: 387
« Reply #1 on: March 09, 2016, 07:32:16 PM »
Just to be clear, the receptacles are not GFCI, only the breaker correct. If that is the case and everything else is done correctly it is either the drill or the breaker. Test the drill on other GFCI circuits, sometimes motors can trip a GFCI.
Logged
Pages: [1] | Go Up Print 
« previous next »
Jump to:  


Fluke Corporation 322 AC Clamp Meter Greenlee TK-30 Basic Electrical Kit Klein CL200 600 Amp AC Clamp Meter with Temperature Sensor
Powered by MySQL Powered by PHP Powered by SMF 2.0.2 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.054 seconds with 50 queries.