website metrics Residential Wiring of Phone Jack
Wire it Yourself.com - Do it Yourself Home Wiring Forum
Welcome, Guest. Please login or register.
December 04, 2024, 02:53:35 PM

Login with username, password and session length
Search:     Advanced search
833 Posts in 290 Topics by 405 Members
Latest Member: Jscoyne2
* Home | Help | Search | Login | Register
+  Wire it Yourself.com - Do it Yourself Home Wiring Forum
|-+  Telephone
| |-+  Telephone Wiring
| | |-+  Residential Wiring of Phone Jack
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] | Go Down Print
Author Topic: Residential Wiring of Phone Jack  (Read 7679 times)
atlantahight
Newbie
*
Posts: 1


« on: January 31, 2012, 11:21:00 PM »

I am replacing a residential telephone jack and cannot understand how to hook up the wires.  The age of the line wires and the old jack is around 30 years. There are 8 wires in the incoming line and the old jack only used 4 of them: Green, Purple (or Red), Blue and Orange.  The new jack has 6 minute contacts for the outlet line (to the telephone), but it has only 4 connection screws on the back: Green, Red, Blue and Yellow. Please advise which line wire goes on which of the jack inlet screws.  If the answer is to match the colors, then how about the Orange on the line and the Yellow on the jack?
Bill
Logged
JP
Administrator
Master Member
*****
Posts: 387



« Reply #1 on: February 01, 2012, 06:42:41 AM »

A standard residential phone line only requires 2 wires. Check and see what two conductors are hooked up to your phone company demark, and hook up the same ones to red and green on the jack.
Logged
Pages: [1] | Go Up Print 
« previous next »
Jump to:  


Fluke Corporation 322 AC Clamp Meter Greenlee TK-30 Basic Electrical Kit Klein CL200 600 Amp AC Clamp Meter with Temperature Sensor
Powered by MySQL Powered by PHP Powered by SMF 2.0.2 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.052 seconds with 49 queries.