website metrics Use of 220V breaker to power two 110V circuits?
Wire it Yourself.com - Do it Yourself Home Wiring Forum
Welcome, Guest. Please login or register.
December 04, 2024, 02:31:47 PM

Login with username, password and session length
Search:     Advanced search
833 Posts in 290 Topics by 405 Members
Latest Member: Jscoyne2
* Home | Help | Search | Login | Register
+  Wire it Yourself.com - Do it Yourself Home Wiring Forum
|-+  Grab Bag
| |-+  General Discussion
| | |-+  Use of 220V breaker to power two 110V circuits?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] | Go Down Print
Author Topic: Use of 220V breaker to power two 110V circuits?  (Read 6662 times)
ottoknow
Newbie
*
Posts: 1
« on: May 09, 2008, 01:12:59 AM »
Can two 110V circuits be powered off one 220V cicuit breaker? Safely?
Logged
JP
Administrator
Master Member
*****
Posts: 387
« Reply #1 on: May 09, 2008, 05:40:45 PM »
The short answer is yes, providing the circuit you run meets the requirements for the ampere rating of the breaker like the right wire size.

The code requires that you use a double pole breaker in the way you want to if the neutral conductor is shared between both circuits. I'm not sure off hand if it meets code using two separate neutrals.
Logged
Pages: [1] | Go Up Print 
« previous next »
Jump to:  


Fluke Corporation 322 AC Clamp Meter Greenlee TK-30 Basic Electrical Kit Klein CL200 600 Amp AC Clamp Meter with Temperature Sensor
Powered by MySQL Powered by PHP Powered by SMF 2.0.2 | SMF © 2006-2011, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.06 seconds with 49 queries.